Another bird bath deicer chicken waterer

Heated chicken bucket watererI have also had good luck
with the bucket or
birdbath
deicer
. The one
pictured is in an outdoor area where my ducks live. I use a smaller
bucket than the main waterer in the coop and have had no problems with
it. I can easily dump it out and refill it with a watering can. I do
put a little oxine in all the water at this time of year, and I do wash
them out thoroughly at least once a week.  The water has some
poultry vitamin in it so it looks a little brown….I will try to
photograph the ducks with it. They were out in the ice storm…they
love the weather!!




I don’t have
instructions for building my little system because it’s pretty straight
forward…. but its just a matter of drilling holes and adding the
nipples, sealing with some silicone (which may or may not be necessary)
and making a hanger with a chain. I then add a bucket deicer (and I
would agree with
the
woman who said to remove the spring around the cord to prevent rust
) add a chain and extension
cord and voila!




Bucket deicer to keep chicken water from freezingI would caution people to be
very careful when cleaning these to not set them down on the nipples. I
actually hang mine from the picket fence and hose them out when the
hose is unfrozen….or I carefully lay them on their side in the
bathtub and scrub them. I add a little oxine to keep bacteria from the
water as directed on the label…but its a tiny amount.


and thats that.



Hope all is well with
you…we have had so much weather, which I dont mind…I only mind the
cold cold…and during that time the nipples froze, even with the
heater inside…I just had to go out and tap them a bit to loosen the
water collected in the nipple itself. Actually, the ducks could have
done it themselves, but I was concerned because that kind of cold takes
so much energy for them that I want to be sure that they are well
hydrated and fed.




—Melina Brown


Want to build your own heated
chicken waterer?  Start with one of our
homemade chicken
waterer kits
.
We recommend our 3 pack
DIY kit
for making a
heated waterer for up to 50 chickens.  The CD that comes with each
kit includes complete instructions to help you build our favorite
heated options without any trial and error.




The heated waterer
we use in our own coop requires two buckets,
a
three foot length of pipe heating cable
($23), and the contents of
our kit.  With a layer of
chicken-friendly
insulation
, the
waterer is good down into the teens.

Heat lamp and a mirror make a heated chicken waterer

Heated chicken waterer

Keeping a chicken waterer from freezing with a heat lampErik Kingston emailed me
these stunning photos of a homemade, heated chicken waterer that can be
thrown together with parts most chicken-keepers will already have on
hand.  He wrote:



[These
two photos] show Sparkle (Silver Wyandotte) drinking from the inner
waterer, a
five-gallon food-grade bucket with two nipples. I drilled a 1/32-inch
hole in the lid to prevent a vacuum and keep out dirt. I have a mirror
against one wall and thought that a heat lamp on a thermal switch would
be enough to keep the water in the bucket from freezing. This winter we
had lots of single-digit days and nights and the water never froze.



Australorp drinking from a homemade chicken watererErik
also threw in this photo as a bonus, showing Iris, his Australorp hen,
“drinking from the single-nipple outdoor waterer we use when it’s not
below freezing.”




I wanted to end with a
quick reminder to anyone who’s still planning on entering our
homemade
heated chicken waterer contest
— the deadline is this
coming Monday, February 28.  If you’re just looking for an easy
way to keep your
chicken waterer from freezing, check out all
of the other great
heated
chicken waterer ideas

from our readers.  Either way, I hope your chickens stay hydrated
through these last cold weeks of winter!

We recommend our 3 pack
DIY kit
for making a
heated waterer for up to 50 chickens.  The CD that comes with each
kit includes complete instructions to help you build our favorite
heated options without any trial and error.




The heated waterer
we use in our own coop requires two buckets,
a
three foot length of pipe heating cable
($23), and the contents of
our kit.  With a layer of
chicken-friendly
insulation
, the
waterer is good down into the teens.

Rain gutter heater for PVC chicken waterer

Drilling holes for a nipple waterer Thanks again for the nipples.  They are working
wonderfully.  I thought you might enjoy seeing how we ended up
using them.




Using the provided
drill, we drilled 13 holes, six inches apart in two inch PVC.







Screwing chicken nipples in with a drill



Screwing the nipples in
by hand tool provided to be impossible.  The PVC is too
hard.  We finally got it in using a deep 9/16 socket attached to
the end of a drill.  Once we switched to the drill, they went in
really fast.







Inserting chicken nipples in PVC pipeWe
have 13 nipples.  The eleven you sold us, plus two we got from
a  neighbor (which is how we found out about them.)  We put
ten across, and three on the legs for chicks.  (You probably
already knew this, but they do not work well on the side.  It took
some messing around to keep the side / leg ones from leaking. 
However, every one of the straight down one works perfectly.)






Rain gutter heaterWe
live in a cold climate.  I don’t want the pipes to freeze. 
So I ran a heated cord through the pipe.  This cord is intended to
keep rain gutters from freezing.  It
Running heater through chicken waterer pipeis
water proof, and safe.




Picture of the heated
cord being run through all sections of the pipe.






Assembling the heated chicken waterer









Glued everything
together.







Rain barrel reservoir for chicken waterer

50 gallon rain gutter
barrel.  I thought about building a stand, so that I could put the
pipe in the bottom, but decided to be lazy.  About 30 gallons is
above the hole.  The rest is dead weight.  In the spring I am
going to plumb running water into the top of the barrel

using
a toilet float to keep it full
.




Attaching the PVC pipe to the barrel



We cut a 2 1/4 hole
using a hole saw.
  Chickens drinking from the heated watererAdded
a slip fitting to the hole, glued the pipe in, plugged in the heated
cord, (since it is cold) and filled with water.  As you can see,
the chickens began drinking almost immediately.






We’ll be announcing the
winner of our
heated
chicken waterer contest
next week.  Thanks to
everyone who took the time to share their designs!
We recommend our 3 pack
DIY kit
for making a
heated waterer for up to 50 chickens.  The CD that comes with each
kit includes complete instructions to help you build our favorite
heated options without any trial and error.




The heated waterer
we use in our own coop requires two buckets,
a
three foot length of pipe heating cable
($23), and the contents of
our kit.  With a layer of
chicken-friendly
insulation
, the
waterer is good down into the teens.